The stock BB length for a 110/74 Ritchey triple crank is 120mm. I'm using an old Campy Veloce triple FD with my Ritchey crank and it shifts fine
Jim in Mpls On Sunday, December 4, 2022 at 7:48:34 AM UTC-6 jacob...@gmail.com wrote: > I did not have the cable installed. I just manually grabbed the cage and I > did have the limit screws open. By my eye it didn’t reach the big ring. But > if I’m using too wide of a BB then that probably explains it. I’ve ordered > a 113mm width. > > I did not realize the 118mm BB referred to Silver cranks only. That’s good > to know. > > I’m an ambitious but poor mechanic. Thank goodness for this list and > YouTube. > > Thank you for the help! > > Sent from my iPhone > > On Dec 4, 2022, at 8:03 AM, Garth <gart...@gmail.com> wrote: > > Jacob, by "not having enough throw" is that hooked up with a cable or not > ? If it's with a cable then it's obviously a cable adjustment issue, but > really whenever a derailleur capacity is in question it's best to simply do > it without a cable and manually see how much it can travel with the > adjustment screws open all the way. > > > The Riv derailleur for a 118mm BB is referring to the Silver crankset > only, it's not universally applicable. > > On Saturday, December 3, 2022 at 8:58:28 PM UTC-5 brendonoid wrote: > >> My Susie is clearing a 2.8" rear tyre with a triple setup on a 113mm BB >> atm. Not the same crank but majority of that era triples were pretty much >> made for 110mm BBs except for some Suntours which needed crazy long ones. >> >> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/ca88c56b-0a99-4117-819c-caa721c33382n%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/ca88c56b-0a99-4117-819c-caa721c33382n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/60829c51-26c1-4552-b9c5-0ca7a5ba706an%40googlegroups.com.
