There's an order of operations to proper adjustment.Have you tried the Park Tool website? They have some great videos for that.
Sent from Yahoo Mail on Android On Sat, Dec 3, 2022 at 12:41 PM, Doug H.<dhansford1...@gmail.com> wrote: I want to tap into the collective knowledge here. I need to adjust my Shimano Deore front derailer on my Clem. It looks to be aligned properly. Is it proper to tighten the cable when the chain is on the small ring and largest rear cog? Should the H and L screws be all the way screwed in when I start the adjustment? I was able to get it to shift but the low screw is pretty much all the way out so it just seems to be off in some way. And, after a couple of rides it seems to come back out of adjustment. Any advice would be most appreciated. Doug -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/1faff1d8-a50b-406b-9398-d29af132187cn%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/1054754169.626324.1670096639863%40mail.yahoo.com.
