Best practice would be to remove the rear derailleur. For future reference, I shipped and checked my Atlantis with Gordon racks front and rear as well as a Nitto decaleur rack and fenders all intact by using an electric bike box, which is larger and much sturdier than the more typical bike boxes. Bike shop did the same shipping it home to me at end of tour. Disassembly and packing as well as re-assembly were so much easier.
On Thursday, September 22, 2022 at 9:16:55 PM UTC-7 maxcr wrote: > Reporting back. > > I managed to pack it, but I had to remove the rack. It was too long for my > box with the rack installed (see photo below before removing it). I also > had to remove the stem, I think short stems have a hard time getting > through the wheel. > > Another good tip I got was to use a dummy axle to protect the fork. > > Thanks everyone, I hope this works out... I'm planning to check it with > the airline (United intl) and it's the first time I'm doing this. > > Max > On Wednesday, September 21, 2022 at 12:00:21 PM UTC-4 maxcr wrote: > >> Thanks Joe, that makes sense! >> >> On Wed, Sep 21, 2022 at 11:35 AM Joe Bernard <[email protected]> wrote: >> >>> If it fits with the rack on I'd leave it, that structure provides some >>> protection for the fork against crush damage. Put some foam or pipe >>> insulation on the rails and you're good to go. >>> >>> On Wednesday, September 21, 2022 at 8:30:06 AM UTC-7 maxcr wrote: >>> >>>> I'm about to pack my Atlantis to ship it home. I'm going to do it >>>> myself but I'm wondering if I should remove the front nitto rack or ship >>>> it >>>> with the rack installed. >>>> >>>> What do you think? >>>> >>>> Max >>>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "RBW Owners Bunch" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/rbw-owners-bunch/-xwfjsdvtkg/unsubscribe >>> . >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/cb6459f1-8cff-47e3-b405-e98e2752bbbfn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/cb6459f1-8cff-47e3-b405-e98e2752bbbfn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> >> >> -- >> Max Faingezicht >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/37340843-5a86-4e6e-b483-400f45ee935dn%40googlegroups.com.
