Have you tried putting a chain on it? Maybe placing tension on the derailleur will bring it into alignment?
--Eric Norris [email protected] Insta: @CampyOnlyGuy YouTube: YouTube.com/CampyOnlyGuy > On Jul 12, 2022, at 12:15 PM, Eric Marth <[email protected]> wrote: > > Hey hey hey everyone. I recently picked up a Shimano XTR rapid rise mech, the > M951. When it came in the mail all seemed good to go. Nice and clean! But I > went to install it on my Appaloosa and found the cage is out of alignment. > Picture attached. The pulley wheels are not vertically aligned with the cogs > of the cassette. > > I had a 2021 Deore rear mech on the bike when I started, it was working fine. > I ended up putting a XTR M952 on the bike and it works great! So the issue is > definitely with this rapid rise XTR. > > Can anyone recommend a fix for this? I wanted to check with the group, seek > some wisdom, before I mounted the mech in my bench vise and started torquing. > > Thanks! > > <s-l1600.jpg> > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/a3d07de0-f516-443f-be29-30c887589f46n%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/a3d07de0-f516-443f-be29-30c887589f46n%40googlegroups.com?utm_medium=email&utm_source=footer>. > <s-l1600.jpg> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CE3BDE64-79D4-4EAD-8E8A-9B7676961D11%40me.com.
