I have been experiencing an annoying clicking from the cranks/BB which cannot be heard when the bike is on the stand but which immediately starts when I am actually peddling. I changed out the pedals and the clicking remained. Then I changed the crank set and the clicking stopped and has not returned and I've put more than 100 miles on the bike with the new cranks. There's not much to go wrong on cranks. The bolts attaching the rings to the spider are tight. The cranks with the problem is a Sugino triple I bought new from RBW. The BB is a Tange also purchased new from RBW. The cranks were tight on the spindle. Any suggestions on what is going on here? Something has to be moving. Is it possible the square hole for the spindle is not square? Perplexed. GeorgeS
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
