Another thumbs up for the Shiny rack - very sturdy & very good value IMHO. Mine is on a 52 Clem & it’s a simple install. Very clean.
Sent from my iPhone > On Apr 7, 2022, at 5:25 PM, Ed Carolipio <ed.caroli...@gmail.com> wrote: > > Congrats on the new bike. On the rack, I'd go with the Shiny over the R14 > since I think it's more versatile. The R14 is really for light loads or to > support a saddle bag - sooo shiny but not as practical. For fenders, I run > the Planet Bike Cascadia fenders (in plastic) on my 52cm Clem L (2021) at > 650b x 60mm. I think a 60mm fender is a good fit for the 650b x 2.10 on my > Clem tires and no interference on frame and fork. They only make this fender > in aluminum now though still competitively priced. Removing the mudflap will > leave two open holes in the fender you'll have to cover or plug. > > I also have a set of SKS Commuter B65 Commuter II at 650b x 65mm I was going > to try but looked like I needed to do some trimming to get it to work. Also, > I thought it was overly broad for a 2.10 tire. I'd go with these if I ever > decided to run a 2.35 tire (and still remain fendered). That doesn't come > with a mudflap. > > I have the P50s on another bike and they work best with 42mm tires. For some > 45mm tires, they are on the skinny side for coverage. These come with a > mudflap which leave two open holes if you remove it. > > --Ed C. >> On Thursday, April 7, 2022 at 10:41:34 AM UTC-7 care...@gmail.com wrote: >> I just purchased a 59 cm Clem L from Crust Bikes. I’m deciding on a rack and >> fenders. I’m down to the Shiny Rear Rack from Riv or the Nitto R14 from >> Crust. Any thoughts or suggestions? I don’t need a heavy duty touring rack >> but the Shiny looks a little more durable. Riv told me they would have some >> soon. >> >> >> >> The SKS P50 look like the right fender but I don’t want a mud flap. Are they >> removeable? Are the B65s too large? >> >> >> >> I’m no mechanic so the easier the installation the better. >> >> >> >> Carey Rogers >> >> Nashville >> >> >> > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/3b0e188c-b475-4ecf-9b2f-0cb4c7171ecbn%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/C840984B-BFAD-4849-B22D-557CA8F8F313%40gmail.com.
