Thanks, I hadn't considered the spacing.
I'm trying to find something minimal for the front of the bike that:
Doesn't interfere with the first crown (I'm using the Tektro cable
hander), and
Doesn't use draw bolts on the vertical stays (just my preference).
If the Tumbleweeds come back in stock, I may give it a go.
Best Regards,
Eric
On Wednesday, July 28, 2021 at 6:01:18 PM UTC-4 Collin A wrote:
> Just keep in mind you'd have to bend the rack to fit the 100mm+ dropouts
> rather than the 135mm+ drop outs in the rear.
>
> Collin in, its smoky again, Sacramento
>
> On Wednesday, July 28, 2021 at 10:43:01 AM UTC-7 joshm...@gmail.com wrote:
>
>> Eric,
>>
>> I emailed Daniel that same question and this was his response:
>>
>> "You should have no problem with clearance above your tire, but there’s
>> no real downside to having the rack that’s a little tall other than
>> aesthetics. The difference between the two rack sizes is only about an
>> inch, we mainly do the two sizes to accommodate bikes with big wheels and
>> low rack mounts where there might be clearance issues with the tire. "
>>
>> Regarding the says, I trimmed mine and it looks great.
>>
>> Josh in NYC
>>
>>
>> On Wed, Jul 28, 2021, 12:52 PM Ginz <the...@gmail.com> wrote:
>>
>>> Hello,
>>>
>>> Has anyone tried to fit the Tumbleweed T-Rack or Pannier Rack (355mm
>>> deck height?) on a Hunqapillar or similar 26" fork using the bosses on top
>>> of the fork crown?
>>>
>>> I'm wondering if that would work. Some bending of the rack stays might
>>> be required by I can't tell if the stays' mounting block would be at the
>>> right height.
>>>
>>> I have a Nitto 32F on there but might try something new.
>>>
>>> Thanks for any advice.
>>>
>>> Eric
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "RBW Owners Bunch" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to rbw-owners-bun...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/rbw-owners-bunch/28af37ce-b13b-4f43-ace9-e9c855c17a4en%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/28af37ce-b13b-4f43-ace9-e9c855c17a4en%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/88653ba4-a560-4443-841b-f1aa7fbfe977n%40googlegroups.com.
