I did this with a hacksaw just yesterday! Should have done it your way, pure laziness not wanting to leave the house & buy replacement Dremel parts.
For cutting you want their E-Z Cut system which has a nice quick release. Use the "real" Dremel wheels as the quality of the cuts is so much higher with less likelihood of shattering. https://www.dremel.com/au/en/p/dremel-ez-lock-metal-cut-off-wheel-ez456-v746 For smoothing & sanding, they make an E-Z Lock system for their 13mm mandrels which should work great. https://www.dremel.com/au/en/p/dremel-ez-lock-sanding-mandrel-sanding-band-ez407-v742 On Thursday, May 13, 2021 at 9:50:11 PM UTC-5 Jim S. wrote: > Hi all, I'm fixing to cut some fender stays and rack struts with my Dremel > rotary. > > Wow, there are an incredible number of attachment options. It's rather > paralyzing. > > I'd be grateful if you could recommend (1) a Dremel attachment for cutting > stays or struts, and (2) an attachment for smoothing out the sharp edges > after the cuts. > > Thanks for any information. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/340ebba0-6f6f-457c-9d73-31fd71b11206n%40googlegroups.com.
