Yeah you got troubles. The stem mount is designed for Silver1 (or Suntour Sprint) dt levers, and Shimano 105, 600, Dura-Ace, et al, might work too. Silver2 is a tougher call because they have a larger barrel than Silver1, your best bet is to stick with the originals me-thinks.
On Wednesday, March 10, 2021 at 6:59:00 PM UTC-8 Wayne Naha wrote: > Howdy Bell-ringers! > I have a beloved old Raleigh Gran Sport that is effectively a single speed > due to the shift levers being mounted on the downtube. That was fun many > years ago, but I don't go there anymore. The last time I tried was very > nearly a disaster. > So I am in the middle of moving them to the stem. I bought Riv's IRD > Quill Stem Mount > <https://www.rivbike.com/collections/shifting/products/ird-stem-quill-shifter-mount>, > > and their downtube cable stops > <https://www.rivbike.com/collections/shifting/products/clamp-on-cable-stops> > to > accomplish this. Now I have run into a technical problem that I don't know > can be solved.[image: 20210310_212520.jpg] > If you look at the picture, hopefully you can see the problem. The cable > guide on the stem mount does not align with where the cable will ride on > the shifter. This shifter is the Suntour Power shifter, with the internal > ratchet, what I believe the new Silver 2 shifters > <https://www.rivbike.com/collections/shifting/products/kjalgjoihjga44451?variant=31122662850671> > are > modeled after. > Has anyone ever dealt with this before? Would the actual Silver 2 > shifters work? > Also, this bit seems too short:[image: 20210310_214834.jpg] > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/e6c3b488-6c47-42df-b151-381bf50c0a26n%40googlegroups.com.
