Thanks, Jeff. Right after I posted this, I found this old pic from Adam <https://13507435628737481763.googlegroups.com/attach/9ffc9dbabeb2f/IMG_3363.jpeg?part=0.1&view=1&vt=ANaJVrE27P4Ev-AJXjpWprsE4DbRvwHGdlUmOnkEps7XbxsjWeYnKAdrdg7nf2AHIJeVNBh3Vx9BtkedsT1AoaNyoUGi4x-76ZryalcRrLAufwR2VTB6Yz4> who had Racers on front and rear and I can see here where the clamp-on cable stop could work for the rear. (Adam seems to have pretty wide tires on this too, maybe 50's.) I guess the earlier Cheviots had housing stops on the top side of the diaga-tube rather than the bottom.
Thinking I'll give this a shot. On Wed, Feb 10, 2021 at 9:50 AM 'Je Mar' via RBW Owners Bunch < rbw-owners-bunch@googlegroups.com> wrote: > Oh and I ran Schwalbe Road Cruisers which (I think we're x44) and my > recollection was that they had to be taken down a bit for removal, but > clearance was way fine when riding. This is a sketchier recollection, I > should add. > > On Wednesday, February 10, 2021 at 9:47:58 AM UTC-5 Je Mar wrote: > >> Hi Justin, >> >> I ran Paul Racer's on my Chev (thanks, Jon Dukeman of CO!) for awhile >> before I picked up some R559s. Riv sells a little clamp-on cable stop (tho >> i don't see it on the site now) that can be mounted down near the pump peg >> (if I recall correctly) to accept the housing to work with Racers. I'm >> only a hack-plus wrench and I was able to do it, so I imagine the more >> gifted among us would have no probs. >> >> Good luck, >> Jeff in Arlington, VA >> >> On Wednesday, February 10, 2021 at 9:34:03 AM UTC-5 Justin Kennedy >> (Brooklyn, NY) wrote: >> >>> I've used Tektro R559's on my Cheviot from the start but was recently >>> considering upgrading to something different due to a slight but annoying >>> mechanical issue on the front caliper. (The release lock is stuck so in >>> order to remove the front tire, I have to fully deflate and squeeze it >>> between the pads.) >>> >>> I noticed on Will's Staff Bikes page that he has a Paul Racer on this >>> Chev >>> <https://process.filepicker.io/AevbsiaW2SbOjYpq8ea4Az/resize=width:1500/https://www.filepicker.io/api/file/V0SSMmnESsiKQxf56XMB> >>> but only up front. Guessing it's because the rear geometry wouldn't allow a >>> hanger placement for a center pull? >>> >>> Has anyone else used this set up? Do Paul Racers have clearance for 700c >>> x 50mm tires? The tires in Will's pic look pretty wide and he's running a >>> fender too so it seems like there would be plenty of room. Thoughts? >>> >> -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/Ned-3rbua7w/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/cff11fde-5e66-4a70-93ad-60a5ae039d9cn%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/cff11fde-5e66-4a70-93ad-60a5ae039d9cn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- (c) 347-325-2640 justinkenned...@gmail.com www.justin-kennedy.com -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CAGY1bf-s_ztKxJEi9%3Dr%2BBMPEy%2B1tEywqycM%2BAEV4qBuP%3DZTkRQ%40mail.gmail.com.
