Clever! Well done.
On Saturday, January 16, 2021 at 1:31:37 PM UTC-5 Clark Fitzgerald wrote: > Solution > > I cut down some Wald basket supports to attach to the low rider pannier > mounts and clamp to the outermost part of the rack. Cut them to size, > hammer them flat at the end, drill the holes, and clean them up with a file > or grinder. I've also used flat aluminum from the hardware store. > > [image: IMG_1868.JPG] > > This photo shows the triangulation that comes from the new outer struts. > The original struts are just outside the brake arms. > [image: IMG_1869.JPG] > Top view also shows the outward support. > [image: IMG_1873.JPG] > In this view of the basket you can see where I cut out some of the wires > to make space for the clamps, and the tombstone of the rack. My goal was to > position the basket as close to the head tube as possible for better > handling. > [image: IMG_1874.JPG] > The result is rock solid, it's a night and day difference from the > original. You could probably use a similar technique to repair a broken > rack. > [image: IMG_1876.JPG] > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/b56b667f-5724-4310-aeb6-07fad101bd0bn%40googlegroups.com.
