I never owned a pair, but as I recall they had a dual pivot design that would accommodate both short- and long-reach brakes. I actually wrote Paul directly and asked whether he had any kicking around, or would consider making them again. The answer was "no" to both questions, so the used market is really the only option.
Jay Lonner Bellingham, WA On Tuesday, December 8, 2020 at 9:10:18 PM UTC-8 Matthew Williams wrote: > Will the Paul reverse levers work with linear-pull/v-brakes? > > > On Dec 2, 2020, at 11:50 AM, Jay Lonner <jay.l...@gmail.com> wrote: > > I used to run reverse levers with ‘cross-style interrupters on Boscos on > my Hunq. I liked this setup ok - to me the Achilles’ heel was that the > non-moosey Boscos were too flexy. The Tektro levers that I had (and still > have, somewhere in my parts stash) don’t work with V-brakes though. Paul > used to make reverse levers that I think were adjustable, but they’ve been > out of production for years - no doubt available at a premium on eBay. > > Jay Lonner > Bellingham, WA > > Sent from my Atari 400 > > On Dec 2, 2020, at 11:28 AM, Matthew Williams <matthewwil...@gmail.com> > wrote: > > > I've been looking into using reverse levers with linear-pull brakes. I > want to mount the levers on the ends of a Bullmoose or Boscomoose bar, and > run the cables inside the handlebars. > > Is this possible? Can reverse levers be used with linear-pull brakes? If > you have this setup, or you've ridden a bike with reverse levers, did you > like it? > > > <reverselever.jpg> > > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/03814C31-A9D4-47AC-B134-CA392E151219%40gmail.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/03814C31-A9D4-47AC-B134-CA392E151219%40gmail.com?utm_medium=email&utm_source=footer> > . > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/04FD3547-7FB5-4E7E-A61E-A75B4FDB1BE2%40gmail.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/04FD3547-7FB5-4E7E-A61E-A75B4FDB1BE2%40gmail.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/89fcd09d-8805-4759-a611-59e7e6092b28n%40googlegroups.com.
