On Apr 20, 2010, at 2:06 PM, CycloFiend wrote:
Hmmm... such spoke/failures (particularly without any pinch
flatting) would
point me back to looking at the dropout alignment or rear triangle
alignment
on the frame. You can get a sense of frame alignment with the
string test
described on Sheldon's site:
http://www.sheldonbrown.com/frame-spacing.html
You are running the right hubs for your frame spacing, right?
That will give you the major alignment of the triangles bit not the
alignment of the faces of the dropouts, which must be parallel to
each other. You need a dropout gauge to check this. Good bike shops
will always have them (although shops with them are not necessarily
good) and all frame builders will have them.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/rbw-owners-bunch?hl=en.
