Hey Nathan! With some luck and the help of another board member, I might have my eyes on a 58, but I'll definitely keep you in mind!
I can verify what Andrew and others already know; that these bikes feel great to ride. I've always wanted a Panasonic or other Japanese-made steel track frame, and to have one with provisions for racks and wider tires only sweetens the deal. - Miles On Saturday, October 24, 2020 at 7:57:02 PM UTC-7 Nathan F wrote: > Beautiful quickbeams, everyone. I've always wanted one... unfortunately, I > was 10 years old when they were produced. I have no doubt if Riv released > this model without tinkering with it (especially in orange), they'd be able > to sell at least a hundred through preorders. > > Miles, I think I sort of know the person who helped you with that bike. > You're in the bay area right? I'm a 56, and the orange/canti is my favorite > model so you'd ever like to sell it I'll happily buy--name your price! > > Nathan > On Friday, 23 October 2020 at 08:05:42 UTC-7 Andrew Stevens wrote: > >> Miles, >> >> My PBH is 88, and I think im running 75/76 saddle height. A 60cm QB would >> be tall but doable with 35s and fenders, but with 48s would be a bike I >> would be scared to ride anywhere other than the flattest smoothest >> pavement; I had a 62 double TT Joe for a bit and had to fall off the bike >> sideways to avoid a bruised pubic bone. >> >> On Wed, Oct 21, 2020 at 1:26 AM Miles <[email protected]> wrote: >> >>> Out of curiosity, what’s your PBH and saddle height? I’m at around 87 >>> but run my saddle around 76, and am wondering if I could fit a 60cm QB with >>> the tire size maxed out. >>> >>> On Tuesday, October 20, 2020 at 3:45:11 PM UTC-7 Andrew Stevens wrote: >>> >>>> Glad to get all the QB love on this thread! >>>> >>>> Patrick: Its a WI 19/21t dingle-cog, and either a 42 or a 38 in the >>>> front. I'm running the 21 in the rear and can stay seated on all the >>>> climbs >>>> on my commute. Last night I fit +/-100oz of carbonated beverages in the >>>> bag >>>> with no wonkiness, but I think the bag volume would max out before the >>>> weight became an issue. >>>> >>>> Eamon: I took a photo of the decaleur for you. A very simple one made >>>> for a custom Cooper (PDX) frame I inherited. It sandwiches in the headset. >>>> >>>> Miles: It looks like we are about the same size! I would be happy to >>>> have the extra standover height with a 56, but I also wanted to set it up >>>> like a cruiser, so I went with the 58. Im sure you'll find one, and then >>>> you can have 1 in both sizes like I want >>>> >>>> [image: IMG_3012.jpeg] >>>> >>>> On Tue, Oct 20, 2020 at 9:29 AM [email protected] < >>>> [email protected]> wrote: >>>> >>>>> The timing of your post is pretty wild: I wanted to post about a >>>>> Quickbeam I just acquired as well! I was very lucky to find this one >>>>> through a friend of a friend etc, and bought it as a complete. Although I >>>>> love piecing together bikes and making them my own, what I like about >>>>> this >>>>> one is the part selections (minus the saddle) are all artifacts from when >>>>> the bike was sold. It is in immaculate condition. >>>>> >>>>> The seller listed this as a 58 but I discovered quickly after it was >>>>> delivered to me that it's actually a 56. It fits me, but more like a race >>>>> bike would which is antithetical to Riv's philosophy and therefore feels >>>>> a >>>>> little sacrilegious. My obsessive nature is fixated on the notion that a >>>>> 58 >>>>> is a better size for me, but I think that for now I just need to let that >>>>> go and enjoy the ride. That said, I hope you get years of enjoyment out >>>>> of >>>>> that 58! >>>>> >>>>> From one new QB owner to another, cheers, >>>>> -Miles >>>>> >>>>> [image: IMG_1539.jpg] >>>>> >>>>> On Monday, October 19, 2020 at 11:31:05 AM UTC-7 Andrew Stevens wrote: >>>>> >>>>>> Just finished this old Panasonic QB >>>>>> >>>>>> 58cm Boscos >>>>>> Phil high flange front and rear to 36h Dyads and a Phil bb >>>>>> Paul Neo-Retros and levers with salmon Kool-Stop pads (naturally) >>>>>> 48mm Supple Vitesse in the 50mm dimpled stays >>>>>> White Industry dingle-cog >>>>>> Nitto rack with Tall Acorn VO bag >>>>>> and an old 2-nut CK headset that I'm going to replace with a gold IRD >>>>>> or an old Shimano 105 (I like contrast) >>>>>> >>>>>> ATMO this bike doesnt get the same cultish praise as other Rivs, but >>>>>> is contextually the pinnacle of GPs unique design/fabrication, in league >>>>>> with the XOs and his early 650b bikes. Track bike spacing but with >>>>>> dimpled >>>>>> chainstays, proprietary dropouts to accommodate brake placement when >>>>>> changing gears mid-ride: he was solving problems no one knew we had. >>>>>> Granted, they were problems he created, but the reverse engineering is >>>>>> what >>>>>> makes some of his bikes so unique. >>>>>> >>>>>> Regardless, I've wanted one of these since I was a 21 year old fixie >>>>>> kid in 2007, and truly for the first time ever, a bike lives up to all >>>>>> of >>>>>> the expectations I placed on it. It's found it's forever home. >>>>>> >>>>>> Andrew in Austin >>>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "RBW Owners Bunch" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/rbw-owners-bunch/YAadV8nicJI/unsubscribe >>>>> . >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/83e606ef-2fdf-4839-90ff-d9e20c89d207n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/83e606ef-2fdf-4839-90ff-d9e20c89d207n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "RBW Owners Bunch" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/rbw-owners-bunch/YAadV8nicJI/unsubscribe >>> . >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/cbb36f8f-4a46-425e-8216-30300285a012n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/cbb36f8f-4a46-425e-8216-30300285a012n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/afdad159-ea70-4907-b760-5cc693336c77n%40googlegroups.com.
