Thanks for the suggestions. I think everything is as it should be, just some overzealous masking, as Laing points out. With older style headsets that head tube edge is often covered, and gets faced. So maybe some confusion at the factory on a few frames. I might hit it with some nice contrasting nail polish (but at this point not removing the cup to do it.)
On Thursday, October 8, 2020 at 1:37:49 PM UTC-4, lconley wrote: > > My Hubbuhubbuh is over-masked in another area - the brake posts. There was > about 1/8 of an inch of exposed, unpainted (un-powder coated?) brake post > showing after I installed the Paul Linear brakes. I removed the brakes and > painted the exposed part of the posts with the orange touch-up paint from > another one of my bicycles - not a perfect match, but good enough. > > I would definitely remove the cups and prep and paint before further > assembly. But I am one of those that hates beausage and rust. > > Laing > > > >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/5bd506a7-3dde-4437-a776-68e491fb00c7o%40googlegroups.com.
