I did email Rivendell as I did not see the VP 001 rebuild kits listed but the other Spencer looked for me and found a few kits in stock. The rebuild is pretty straightforward and it just involved finding the right socket and pick to get the bushings out. The bearings are a sealed design. Easy to do and saved a set of pedals. I think the cost to rebuild them was worthwhile.
On Wednesday, August 19, 2020 at 11:00:52 AM UTC-4 Garth wrote: > > I have no idea if this helps or not, I take any pedal I buy apart upon > install and liberally apply grease in the axle. Enough that it oozes out > when it's back together. Knock on a Gorillas tree, everything has worked > perfectly. > > Some brands have very little grease from the factory. > > Before assuming the bearings are gone, if you hear noises just take it > apart and grease it very well. Try it out ! Grease is a great thing ! > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/34db1e9e-4d63-41d0-bd17-93ec9a3df701n%40googlegroups.com.
