I actually just did this yesterday with some ESI grips on my Albatross bars. I was re-cabling my bike so I didn't have bar-end shifters installed that I was working around, but I found the process much easier than I anticipated. I used glass cleaner instead of hand sanitizer. I've also heard that hairspray works well. I just put the cabling in the ESI grip and slipped them both on together. I used a bit more cabling than I needed so I could cut the extra at the bar-end. If you try to pull from the other size to get it even, it slips through rather easily, and you'll have to start over (this got me twice).
-Ray On Thursday, August 27, 2020 at 2:35:52 PM UTC-5 Erik Wright wrote: > A recent Riv email update (July 31) had a small bit about slipping shifter > housing underneath Oury or ESI grips. I'm not sure how to link to the email > online so I took this screenshot of the email (attached). > > Erik, Philly > > > On Thursday, August 27, 2020 at 11:30:43 AM UTC-4, mikemike wrote: >> >> I recall seeing a slotted handgrip when using albatross bars and bar ends >> so the housing is out of the way of the grip. can anybody point me to these >> or suggest another method >> >> mike goldman >> rhode island >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/d20263b5-ecf1-4edd-9395-ed9a710d3f6an%40googlegroups.com.
