Okay thanks for the info. I'm not equipped or experienced with bottom bracket replacement which is why I was hoping to salvage what's already there and not have to remove and replace it. But maybe this is an opportunity for me to figure it out. Will need to invest in some tools I assume.
On Tuesday, August 25, 2020 at 11:45:57 AM UTC-4 aeroperf wrote: > Justin— > > To answer your last question first, no, that spindle won’t fit. > Any way you look at it you would have to replace the entire bottom bracket. > The crank creaking and popping is more than likely due to the bottom > bracket itself. > > If you want the cheaper solution, just remove the crankset, and replace > the bottom bracket with a new BB51 or a Shimano BB-MT800. These things are > only about $25 and can be replaced reasonably easily with the right tools. > > Are you dead set on the looks thing? > > You need to remove the bottom bracket, and replace the bottom bracket with > a square taper sealed unit like a UN-26. > > https://www.amazon.com/SHIMANO-BB-UN26-Square-Bracket-68x113-mm/dp/B001EIAZ7A/r > > If it is a dedicated mountain bike, it will need a 73mm sealed unit. You > will also need to find the right width spindle to keep the chainline at > 50mm. Somebody on the list with a Suzie/Wolbis might help you find a > spindle, since I’ve heard (but don’t really know for sure) that it has a > 73mm bottom bracket shell. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/d282d4f0-9a28-4efa-b74e-833ff0de0d00n%40googlegroups.com.
