That's really interesting. I don't think I've seen that before. If it were me, I think I would treat it just like setting the bearing load in a hub or bottom bracket and just tighten just to the sweet spot of no-play but spins freely.
On Tuesday, August 18, 2020 at 1:24:13 PM UTC-5 Deacon Patrick wrote: > Fixed gear single track riding my Quickbeam I managed to loosen the dust > cover that doubles to adjust the bearings with a pedal strike on a rock. I > snugged it up via an alan wrench and the pedal spins freely and everything > seems fine. However, the MKS site says: "The dust seal cap also functions > as the bearing adjuster. If you loosen the cap, it may cause play and > premature wear." https://www.mkspedal.com/?q=en/product/node/331 > > Anything more/different I should do? > > With abandon, > Patrick > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/8ee081ce-0fff-475c-8cea-74939197182bn%40googlegroups.com.
