I used a 32f with Shimano v brakes on the front of my Clem for a while, which to my understanding has basically the same fork as the Hunqapillar. It worked with no problems, but the clearance was exceedingly tight between the transverse cable and the bottom of the center rack strut. The cable never rubbed but the rubber boot that goes over the end of the noodle did. If it were a different model fork with slightly less tire clearance I could see the cable and strut interfering with each other.
Old picture from Riv's Instagram showing my bike with the rack installed: https://www.instagram.com/p/BJWQx7JgrYp/?igshid=1c6vz7fgn9bwl -Jeremy Till Sacramento, CA -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/767a1695-a35a-4ed8-8452-13245ece34e5o%40googlegroups.com.
