Ginz: I use a Duo on my Atlantis, so probably close to the same width fork. I have to use spacers, and Rivendell has them:
https://www.rivbike.com/collections/racks/products/rack-hardware-thick-washer-spacer-each Currently out of stock, they list the dimensions if you can find an alternate source. At $2 apiece, get a bunch. On small hardware like this, I need 1 to use & 1 to lose. dougp On Monday, July 6, 2020 at 8:39:08 AM UTC-7, Ginz wrote: > > Hi Folks, > > Has anyone fit a Tubus Duo on a Hunqapillar 26" fork or similar? All the > eyelets and hourglass bosses are in the right place but some spacers would > be required. Otherwise, the flanges on the rack push against the fork blade > and could marr or "crush" the tubes. I would estimate the spacers would > have to be 2-3mm at all three bolt locations. > > Does that seem advisable? The was some recent discussion of this in the > forums and I wouldn't hesitate to run a few spacers. But, I may be unwise. > > https://photos.app.goo.gl/WnQDYDUM6SrXjWSc8 > > > Best Regards, > ginz > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/3bcf4709-4541-47e3-aa15-8a078da81658o%40googlegroups.com.
