George, my heart is warmed anyway! š Clearly I did not read that post correctly!
I ordered the triangle nut from Riv already, but thank you. Also, youāre the second person to have said you had a Tall Boy stem and got rid of it. But why? I adore this tall stem and canāt get used to anything less now. I had the 225 mm Technomic on this morning and I just hated it. Sent from my iPad > On Jun 17, 2020, at 12:43 PM, George Schick <[email protected]> wrote: > > ļ»æ > OK, that's fine. Whatever you decide to do. But I wasn't referring to the > entire stem, just the triangular nut and the bolt with it so you can replace > the ones that aren't working. As far as the entire tall stem is concerned, I > used to have one of those so I went down to root around in my parts box(es) > and couldn't find it. So I must've given it to someone else in the past. > > >> On Wednesday, June 17, 2020 at 2:36:45 PM UTC-5, Bicycle Belle Ding Ding! >> wrote: >> George, thatās so, so kind. Iām hoping to find another 280 mm tall stem, >> however. Theyāre rare like unicorns, so Iām guessing you have the 225 mm. >> But thank you so much - that was heart-warming. ā¤ļø >> Leah >> >> Sent from my iPad >> >>>> On Jun 17, 2020, at 12:16 PM, George Schick <[email protected]> wrote: >>>> >>> ļ»æ >>> Leah - if you want one like Eric shows (the kind that's also on your son's >>> bike) I have one on an unused Nitto stem I can let you have just for the >>> asking. Lemme know and I'll drop into an envelope. >>> >>> >>>> On Wednesday, June 17, 2020 at 11:33:40 AM UTC-5, Bicycle Belle Ding Ding! >>>> wrote: >>>> The one on my teenagerās Clem has that. Iād love to have it for this stem >>>> - where do I get it? >>>> >>>> Sent from my iPad >>>> >>>>>> On Jun 17, 2020, at 9:32 AM, 'Eric Norris' via RBW Owners Bunch >>>>>> <[email protected]> wrote: >>>>>> >>>>> ļ»æHere is what you should have: >>>>> >>>>> <image.jpeg> >>>>> >>>>> --Eric Norris >>>>> [email protected] >>>>> Insta: @CampyOnlyGuy >>>>> YouTube: YouTube.com/CampyOnlyGuy >>>>> >>>>>> On Jun 17, 2020, at 9:30 AM, Leah Peterson <[email protected]> wrote: >>>>>> >>>>>> Eric, thatās the nut that came with it, and itās the same nut on the >>>>>> other Technomic stem I have. How can it be wrong? Both stems were >>>>>> purchased new. >>>>>> >>>>>> Sent from my iPad >>>>>> >>>>>>>> On Jun 17, 2020, at 9:29 AM, 'Eric Norris' via RBW Owners Bunch >>>>>>>> <[email protected]> wrote: >>>>>>>> >>>>>>> ļ»æThat is the wrong nut. Nitto uses a triangular shaped nut on the back >>>>>>> side. I donāt know that what youāre using is dangerous, but you should >>>>>>> by all means get the proper Nitto nut. >>>>>>> >>>>>>> --Eric Norris >>>>>>> [email protected] >>>>>>> Insta: @CampyOnlyGuy >>>>>>> YouTube: YouTube.com/CampyOnlyGuy >>>>>>> >>>>>>>> On Jun 17, 2020, at 9:26 AM, Leah Peterson <[email protected]> wrote: >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "RBW Owners Bunch" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>>> an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/EA8DE212-405B-44B9-B964-AFEA9C1E431D%40gmail.com. >>>>>>>> <Video.mov> >>>>>>>> >>>>>>>> >>>>>>>> Sent from my iPad >>>>>>>> >>>>>>>>>> On Jun 17, 2020, at 8:39 AM, 'John Hawrylak' via RBW Owners Bunch >>>>>>>>>> <[email protected]> wrote: >>>>>>>>>> >>>>>>>>> ļ»æ >>>>>>>>> ++1 on this. >>>>>>>>> >>>>>>>>> The nut flats contact a 'flat' in the casting, and when you tighten >>>>>>>>> the allen in front, the 2 flats contact each other, and the nut does >>>>>>>>> not rotate as you tighten it. Visually check the BACK of the stem >>>>>>>>> for the nut flat to line up with the stem casting flat to line up. >>>>>>>>> >>>>>>>>> I would do this before greasing or oiling anything. The bar is NOT >>>>>>>>> designed to move or rotate in the clamp and needs grease only to >>>>>>>>> prevent galvanic corrosion (dis-simiiar metals like steel in Al) >>>>>>>>> >>>>>>>>> John Hawrylak >>>>>>>>> Woodstown NJ >>>>>>>>> >>>>>>>>> On Wednesday, June 17, 2020 at 11:15:55 AM UTC-4, lconley wrote: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Ok, what of the strangely spinning bolt? >>>>>>>>>>> >>>>>>>>>>> Some Nitto stems have a nut on the backside that needs a wrench on >>>>>>>>>>> it when you turn the Allen wrench on the front bolt to keep it from >>>>>>>>>>> spinning, some do not. If you have a nut on the back of the stem >>>>>>>>>>> that you did not hold still while you were turning the Allen >>>>>>>>>>> wrench, that is likely your problem - the stem bolt was never tight. >>>>>>>>>> >>>>>>>>>> Laing >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>>> the Google Groups "RBW Owners Bunch" group. >>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/rbw-owners-bunch/FHIW1F5qAE0/unsubscribe. >>>>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>>>> [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/27254025-63a2-48a3-8c29-1a949402a15eo%40googlegroups.com. >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "RBW Owners Bunch" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>>> an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/EA8DE212-405B-44B9-B964-AFEA9C1E431D%40gmail.com. >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to a topic in the >>>>>>> Google Groups "RBW Owners Bunch" group. >>>>>>> To unsubscribe from this topic, visit >>>>>>> https://groups.google.com/d/topic/rbw-owners-bunch/FHIW1F5qAE0/unsubscribe. >>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>> [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/51DF0A99-E790-4F61-AB57-B5CB1B6AA2C5%40me.com. >>>>>> >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "RBW Owners Bunch" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to [email protected]. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/72768EA1-5B96-4116-82FE-FC2E547E0E95%40gmail.com. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "RBW Owners Bunch" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/rbw-owners-bunch/FHIW1F5qAE0/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/BDA483CA-908A-44C8-9C0E-A2D5F2F6B323%40me.com. >>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "RBW Owners Bunch" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/rbw-owners-bunch/FHIW1F5qAE0/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/ca7eb5e4-85e9-4dd9-9474-799f319a71afo%40googlegroups.com. > > -- > You received this message because you are subscribed to a topic in the Google > Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/FHIW1F5qAE0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/eff4af29-a782-43c1-bd26-cc26d5456f1bo%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/76095998-ECAB-46E8-AD78-B546A7DE90C8%40gmail.com.
