On Monday, 23 March 2020 03:15:58 UTC+11, Lithocarpus wrote: > > I’m considering setting up my MIT Atlantis with a 1x system and was > interested to know if anyone here has done this, what components you used, > and if the chain stay length caused any complications. So far, I’m > considering a 11x50 SunRace cassette, SRAM eagle GX derailleur, chain, and > trigger shifter, but am hoping to use my existing Silver crankset. It’s a > triple, but I think the middle chainring position would be aligned > correctly. If that crank works, I’d likely throw a guard on it. Long term, > I’m interested in a White Industries crankset, but that’s further down the > road. >
I have setup two 1x bikes for my wife, the most recent using that same Sunrace 11-50 cassette with SRAM AXS Eagle shifter, derailleur, and chain, SRAM GX Eagle 165mm cranks with a 36t narrow-wide chainring, some wheels and other stuff I already had, and I installed the components on a Carbonda CFR505 frame. She's an experienced cyclist, and likes the 1x setups and the electronic shifting. The SRAM Eagle chain was 126 links as supplied - I had quite a few links left over when I shortened it to install on the Carbonda, but don't know if 126 links would be enough for the Atlantis. <http://www.users.on.net/~njpayne/images/IMG_20190819_130558.jpg> Nick -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/6dcc0c22-8592-4633-846e-d081e779b0c0%40googlegroups.com.
