Bummed to hear the Silver 2 shifters don't mount perfectly on the Paul thumbies...even with the adapter. That was my plan ..to use the Paul mounts in 31.8mm size and the silver 2 shifter. Does anyone know if there's another shifter mount with a 31.8mm clamp size?
On Thursday, January 23, 2020 at 6:55:09 PM UTC-5, dougP wrote: > > Grant points out in his latest blog: > > "They fasten together fine, the angle of the exit-housing is right on, but > the cable groove in the lever sits obviously outboard of the cable hole in > the mount, so there's cable rubbing on aluminum, extra friction, and > so--bummer." NOTE: This is on Microshift mounts. He makes a good point > that a little rubbing of the cable on the aluminum is no big deal. > > https://www.rivbike.com/blogs/peeking-through-the-knothole/2nd-of-2020 > > Not sure if it qualifies as a bummer but glad he pointed it out. I tried > mounting on Paul's Thumbie mounts & had the same result. Since I plan to > get Rivendell's mounts when they show up (soon?), I just left well enough > alone for now. I didn't want to build everything up, only to tear it apart > again when the real mounts arrive. > > Anyone else tinkered around with the Silvers on any other mounts? > > dougP > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/1bfd16c6-61ea-4817-ab96-cdfdc6a9e614%40googlegroups.com.
