Well, I stand corrected. I've never had a properly set up bar bar slip except for cheap steel bars in cheap steel stems, and even that problem was fixed with a box wrench (ie, it wasn't properly set up).
I guess that yes, the Bullmoose makes sense now. On Sat, Oct 12, 2019 at 3:55 PM Clayton.sf <clayton...@gmail.com> wrote: > When I ride the bike, boscos and Albas and bullhorns and anything else > with that kind of lever will slip in a 25.4 or 26 stem if tightened per > torque recommended and interfaced properly. Overtorquing and friction paste > are ways to minimize this and even that is no guarantee. > > Clayton Scott > HBG, CA > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/097aba9b-69b1-4335-8ccb-e6e819e58a63%40googlegroups.com > . > -- ----------------------------------------------------------------------- Patrick Moore Alburquerque, Nuevo Mexico, Etats Unis d'Amerique -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CALuTfgvXVuD4i6ovy-S7D5fMmGi-z99X_cKXPqADahD4LqN9Ew%40mail.gmail.com.
