Another thing to consider if your doing a custom build is to use Sapim Strong spokes. Sapim uses the highest strength stainless alloy in the Stongs - came as C X-ray bladed spokes while DT uses a lower grade steel in heavier grade spokes. The combination of a heavier gauge high strength spoke with a robust rim built by a good wheelbuilder produces a truly robust wheel.
https://dcrwheels.co.uk/custom-wheelsets/choosing-spokes-advice/ I’m not sure what kind of tape we used but I think it was Stan’s. Valves Stans I’m pretty sure. For sealant I used Stan’s but have purchased the new Panaracer sealant that Compass sells. I’ll use this when these tires need to be replaced. https://www.renehersecycles.com/new-sealant-for-rene-herse-tires/ John On Sat, Sep 28, 2019 at 7:44 PM Pancake <abe.gard...@gmail.com> wrote: > And with John’s answer we have a winner! Thanks John! > > Next: did you use the Velocity 21mm tape and valves? > Which sealant did you use? Orange Endurance? Stan’s? > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/56a35385-1b6f-48a6-a27c-c26d82357b97%40googlegroups.com > . > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CALSyJagszq8PEJUBtn37T21vr3QKSC0mfytm6nno0c28yS8%2BRw%40mail.gmail.com.
