Hi all, I'm having some issues with creaking from the cockpit area of my Roadini under side-to-side force. I'm using a Technomic at the moment adjusted very low, 3cm or so above minimum, and I think the play caused by the friction point being so low is causing it - there's a very little bit of visible motion between the stem and steerer tube when I wobble it.
Two questions: 1. Have any of you experienced this creaking issue with tall quill stems adjusted low? I think that may be the issue but I'm not 100% sure. RBWOB is the place to ask about tall quill stems anyway... 2. What shorter stems is the Noodle compatible with? Obviously Technomic but I tried to thread another 40cm (this creaky one is 44cm) into a Nitto Dynamic stem with a wider clamp and found the curves are too tight to fit in it. Is the clamp of the Technomic the same as that on the Pearl/NP? Is anyone else running Noodles successfully on other stems shorter than a Technomic? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/c8f0cbf1-3247-4947-a7da-adb22bd79fcc%40googlegroups.com.
