The tool has been spoken for. Thanks, all.
On Friday, June 28, 2019 at 3:39:54 PM UTC-5, George Schick wrote: > > No, not "for sale," *Free Stuff! *I'll be turning 70 in just over a > week, plus my wife is strongly encouraging me to get rid of things in an > attempt to prepare for eventual down sizing. So here's this tool, left > over from the days of single pivot side-pull or center-pull brakes that > allows you to hold the brake in a steady position by inserting the two > prongs into the two springs on the back side of the brakes while tightening > the securing bolt. Campy Record was the only one I can recall from those > years that did not require such a device because it had slots on each side > of the mounting arm that would allow the use of a thin axle wrench to hold > it steady. Newer dual-pivot brakes do not require this tool since they > have a micro-ajust set screw to even the brake pads. But, if you're still > using older style single-pivot SP or CP brakes you may find such a tool > handy. As I reduce my inventory I am feeling generous and will even pay > the postage to ship it to someone (unless you feel compelled to > compensate). It's first come, first send, all pending on how well the PM > mail on this Google works. > > [image: DSCN0928.jpg] > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/668d75f8-b680-42bd-a3e7-3abfb7e1c57b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
