I'll figure out how to do that and give it a wingding Phillip. Been a while since I've looked at it. Have a couple of cheapie ACS single freewheels on it. Big ones. Used it for single speed MTBing. But now I want to gear it for fixed/free grocery getting on an old Bianchi Peregrine MTB frame I've had for 30 years. I remember trying to fit a Park freewheel tool on it but the eccentric part of the hub was too high to allow the freewheel tool to fit into the notches. Got frustrated so threw it into a corner and forgot it for a decade or more. Oughta just sell the thing but it's kind of like a new toy now. So will play with it for a while.
Craig in Tucson On Wednesday, February 6, 2019 at 4:00:21 PM UTC-7, Philip Williamson wrote: > > You can take the eccentric part off the hub, and use a regular tool. > I suggested that to a local shop the other week, and it worked. > > Philip > Santa Rosa, CA > > On Wednesday, February 6, 2019 at 10:27:49 AM UTC-8, Craig Montgomery > wrote: >> >> Anyone ever remove a single (not WI) freewheel from an ENO eccentric >> WITHOUT RESORTING TO BUYING THE ENO TOOL ($40)? >> >> Craig "so tight I could sit on a dime and tell you whether it's heads or >> tails" in Tucson. >> >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
