I use my 1/2 framebag to route my cables through the main triangle, then use the plethora of brazeons on the seatstays with the p-clamps provided with honjo/simworks fenders (https://sim.works/collections/small-parts-simworks-by-honjo/products/4rclipset) to do a clean route and allow for easy on-off when I need to. The cable I use is a bit thicker/burlier, so it requires some minor bending and re-bending of those clamps.
I can get a picture up at some point if you are curious. Collin On Friday, January 25, 2019 at 8:49:36 AM UTC-8, Neil Doran wrote: > > I just added dyno power and front/rear lights to my Sam. The cabling in > the front along the 27f Nitto rack is straightforward enough, but I am > looking for a clean-ish solution for the rear lamp that is mounted along > the left side seatstay. > > Any cool tricks for routing and securing the cable? This bike now lives > fender-free, and sees a lot of dirt action, making me think of staying away > from the down tube and instead running under the top tube. What do folks > use to secure and/or hide the cable? Packing tape? Tiny zip ties? > > Thanks, > > Neil > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
