My Albatross experience is limited to one setup, which is similar but not identical. I've got a cromoly Albatross on a bike with a vintage SR made stem with a 25.4mm clamp diameter. I don't have a slippage issue. I don't think you should have a slippage issue under normal riding conditions. If I were you, I would have a good mechanic who you trust look over your setup. That good mechanic will check that you did everything right, check the torque on the bolt and then tell you what he or she would do to resolve the issue. The only setup issue that comes to mind is that if you don't grease the threads and/or don't lube the interface between the bolt head and the stem, then the bolt can feel tight in your hand without really being all that tight.
Is there any other information about your parts that you haven't shared yet? Did you purchase these parts new from Rivendell? Or are these used bits with unknown histories? Where in the country are you? Bill Lindsay El Cerrito, CA On Friday, December 28, 2018 at 9:46:53 AM UTC-8, Sean B. wrote: > > Hello! > > Has anyone experienced and slippage with this setup? I know i have the > correct sizes, but it keeps slipping when the bolt is tightened. I'm afraid > to keep hammering down on the bolt and damaging anything. How tight is too > tight? Any tips? > > Thanks. > > -Sean > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
