Definitely should test on another wheel. I'm not sure I agree with the idea that you don't need a tensometer to verify your moves so you don't over tighten, but I do know small moves are better and having a truing stand is really helpful. I would recommend a drop of oil on each of the nipples on the wheel you're testing on because likely it's an old wheel you pulled out of the garage or the alley and you may strip the threads on the spokes. It's just a good habit to get into whenever even if you're not building a new wheel. Doesn't hurt!
On Saturday, October 6, 2018 at 8:28:00 AM UTC-7, Lum Gim Fong wrote: > > Was wondering if this is easy to do for a first timer, or could I mess up > the spoke tension and cause big probs. > > Of course, safety is my first concern. I don't want to mess up the wheel > and cause a safety issue. > > But it is a skill I would like to have so I don't have to run to the LBS > over something that may be simple to do myself. > > Books make it seem simple. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
