Keith - That's an interesting note about the spring colors and insertion holes. Will confirm!
Dave - I'm running 35mm Delta Cruisers under 50mm fenders, and it's tight but not worrisome. Wouldn't be surprised if (some) 38s also fit. On Sun, Sep 2, 2018 at 10:00 AM iamkeith <keithhar...@gmail.com> wrote: > Backpedaling here... > > Looks like all the self energizing ones were black. I thought non-SE like > on the bike pro page were vapor ware and never really made it to market, > but I appear to be wrong. I'd still check the internal springs to make > sure they didn't get switched to the wrong sides. Since they were made by > dia compe, they likely have the same springs as 987s which are color > coded. As you look at the bike from the front or rear, the arm on the left > should use the yellow spring, with silver on the right. I think. ( might > also be backwards since your adjuster nut is on the other side of the arm > compared to the dia compes?) It will work with the springs reversed, just > barely, because even a spring that is UN-wound will want to return to its > neutral position. Also, there are little holes that either end of the > spring needs to plug into, at the arm and tension adjuster nut. It will > fit together even if not engaged, so verify that the are. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/ScQIrdkv9gc/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
