**Updated and added some more!
Bike Parts for Sale TLDR: (but make sure to read below on condtion of certain items!!) Shipping not included. Photos: https://goo.gl/photos/9NfCPWYZ6BJEL13f6 Brooks Challenge Tool Saddle Bag, Black, $20 Baggins Handlebar Bag: $60, Shimano LX V-Brake, $7 Shimano CX70 Canti Brake (1), as-pictured, no additional spacers: $25 IRD Top Shifter Mounts Only: $40 Shimano BarEnd Pods Only w/ washers: $25 Shimano BarEnd Pods No washers: $20 Shimano UN26 BB, 68x113: $5 Shimano Sora Front Derailleur (with plastic shim): $8 Brooks Team Pro (Eroica 2015) New: $85 Velo Orange Grand Cru Quill Stem, 120mm New: $35 Nitto Technomic, 80mmx225: $25 Weinman Single Pivot Brakes (Type 600 & 500): $12 Minoura Rear Triangle Kick Stand: $10 Mtn Compact Chainrings 94/58: 44/34/22: $12 SideTrack HD Accessory Mount: $7 Boulder Bike Under-Fork-Crown Fender Thingy (under-crown washer): $20 B&M Ixon IQ Battery Light (with charger): $30 Details Below Hi all, just starting the process of culling the closet, drop me a line if you’re interested in anything, I’m in the Washington DC area. All prices below are before shipping--if you want something please send me a message with your zipcode and i will calculate totals. if you buy more than one item then i will combine shipping as best as i can, there is a photoset here -> https://goo.gl/photos/9NfCPWYZ6BJEL13f6 If you want more photos of an item, please let me know. If you want to make me an offer I won’t be offended, but don’t be offended if i don’t reply. Please send all messages privately. For payment, i accept either Google Pay (preferred) or PayPal. I will leave it up to you based on your comfort level on the type of paypal to use. And a few terms to keep in mind. - Send an email directly to work out terms, posting a reply does not reserve an item. I will not be able to reply to everyone, but i will update the post once something sells. If i don’t get back to you, assume that someone beat you to it. - If you ask me for a total w/ shipping calculated, please let me know promptly whether you still want the item. It’s not fair to me or the rest of the list to delay, if you need more time to decide ask for it, but be ok with it being sold to someone else who’s ready to buy. - After we agree on terms, i will send you an invoice, i expect/give you 24 hours to send payment (unless other arrangements are made). Then i will go-on to the next person. - Normally i ship within 1-2 days, however if i’m travelling for work it may be delayed up to a week (ships on the weekend). I will let you know at time of payment, if getting the item is time critical, please bring this up before payment. Prices do not include shipping (I will charge you actual USPS shipping)--I’m on the east coast so shipping will be less the closer you are to me. Please email me directly with any questions, if you’re reading via a smart-phone, you may need to switch to the desktop version (link at the bottom of your browser), to reply directly. Brooks Challenge Tool Saddle Bag, Black, This is the small leather tool bag, i picked this up second hand and one of the bolts had come undone on one of the straps, i replaced it with a nut and bolt, you can see the bolt on the inside. There is some scratches and wear on the leather, it could use a good polish. The straps are a little crunchy and stretched out, but it still feels like it will hold. Baggins Handlebar Bag: I believe this is the pre-cursor to the hobo bag, it looks a little smaller then a true hobo bag and the pockets on the front are different, this one has 1 big pocket instead of two separate ones on the front, with a single flap. Some light grease stains on the bottom where it got close to the tire (looks worst in pics). Otherwise in very good condition, the leather is still really dark. You can use this without a rack or decaleur (and i don’t think using a rack would actually help) the bag sways as you pedal--but there are d-rings on the corners in the front where you could secure it with some twine, will work with drop bars the best. You can get this to work with alba and moustache bars but it will require some creative arrangements with twine to the brake levers to secure it. --- Shimano LX V-Brake, Single v-brake (1 wheel), the pads are nearly worn down so you’ll need to replace soon, no pics but will take some if you really need them. Shimano CX-70 Canti brake: 1 wheels worth of brake, pads look new and brake is in VG condition. The link-wire is not original, i can sub in a dia-compe style straddle carrier if you prefer. i do not have any additional spacers, you may need these depending on the canti stud spacing for your bike. Shimano Barend Pods Only w/washers: The washers have tabs, which may or may not work with your shifters, worst case you can grind off the tabs Shimano Barend Pods No washers: Either order some regular square washers from Riv to use non-shimano shifters OR Order some Shimano washers to run shimano shifters (either from Riv, or i can give you the Shimano part-number to order from your LBS) IRD Top Shifter Mounts Only: Used, sized for roadbars (25.4) so you will need shims to mount these to other (22.2) (not included, though $3 online) please read-up on these and think about what shifters you want to use, as-is these would work with non Shimano shifters (Shimano shifters need a special washer, which Riv sell). I mounted a set of Suntour DT shifters, right side was fine but left side was a little loose--would need an additional washer/shim. You may not have that problem but FYI. I’ve included a picture of these mounts with Suntour DT shifters mounted as an example. Shimano UN26 BB, 68x113: mounted and used, threads look clean Brooks Team Pro (Eroica 2015) This is the special edition Eroica version from 2015, it is honey-brown, copper rivets, silver rails, no bag loops and has an imprint on the top. The box is a little beat up but this has never been mounted on a bike. Velo Orange Grand Cru Quill Stem: See specs at VO: https://velo-orange.com/collections/stems/products/grand-cru-quill-stem 120mm extension, super shiny, a few fine scratches from handling, but never mounted, no insertion marks. Has a mount for a temple bell. Nitto technomic stem: Classic riv popular stem, 80mm extension with 225mm quill. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
