Even quicker is using a strong, light parking band spanning the distance from the backside of the handlebar to the front side of the brake lever. i use a high quality bungee looped through a section of inner tube which I then slip onto the handlebar opposite my front brake lever. i don't use a kickstand, so when i park I lift the looped bungee over the end of the brake lever, which locks the brakes quite firmly and holds the entire bicycle rigidly against a wall or post. (I prefer to allow only the edge of the handlebar to touch the wall or post, eliminating frame scratches.) I use a 8"-10" section of strong, high-quality bungee looped through a section of old inner tube a bit larger in diameter than my handlebar. Be sure to place the section of inner tube into the bungee loop before you join the ends of the bungee. . Hold opposite ends of the bungee in a circle, place both ends in a bench vise or vice grips, then join them by wrapping hemp twine tightly around the two compressed bungee ends, knotting as you go.. My parking bands are inconspicuous, out of the way, and have been in use for several years. Works on any handlebar with any type of brake lever. By the way, those pony tail loops found everywhere these days are rarely strong enough to work properly.
Dave in Kansas . . On Thursday, March 1, 2018 at 9:11:48 PM UTC-6, Ian A wrote: > > Just lock the front brake lever. I use a toe strap. Works perfectly. > > IanA > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
