Folks, I have a 46cm Compass Maes Parallel drop handlebar that didn't work out for me. 25.4 center bulge for stem clamp.
I mounted the bar in a Nitto quill stem with some non-aero brake levers to test it out for a handful of rides under 10 miles, all on the road. The bar has not had any bar tape or cable tape adhered to it. There are no discernible scratches or marks except where the stem connects with the bar at the center bulge. The scratches are from using Nitto 25.4 to 26.0 shims. They are on the surface only and could possible be polished out since these bars have a bare polished surface unlike Rivendell's satin finish on their Nitto bars. Some of these scratches are visible just beyond the edge of the stem (maybe an 1/8" past the stem on either side) but most of them are to the rear of the bar (facing the rider) and are barely visible for the most part. The bar is, otherwise, in excellent condition. $100 including shipping. Regards, Paul -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
