Hi Brian, I've used HAR (ver1) and Nitto Mini on my Hunqapillar. It works great. I've also used HAR with Haulin Colin rack on my HHH-- also works great. In both cases, it's easy to attach/remove HAR for when one needs to change carrying capacity.
BTW: Nitto 32f attaches to Riv-spec mid-fork brazeon. It doesn't mount to canti-posts. Also, I was able to mount Haulin Colin rack while using V-brakes. (Haulin Colin rack mounts the same as 32f.) Depending on your V-brakes set-up, you might not need to replace it with canti-brakes. Does the V-brake cable cross directly infront of the fork hole? Good luck! shoji Pic of the Hunqapillar w/o HAB: https://flic.kr/p/Bt5AgA On Wednesday, November 1, 2017 at 12:49:48 PM UTC-4, Coal Bee Rye Anne wrote: > > Anyone already using this rack combo at the same time? I’m re-thinking > future front rack solutions for my 700c Clem. While considering > some alternate handlebar experiments (possibly moving currently > installed Chocomoose to another frame and going wider on Clem) I may > also substitute spare cantilever brakes for the stock v-brakes which would > allow me to use an otherwise unused 32f mini rack on my Clem fork. I like > the idea of installing the 32f mini with double ended canti rack adapter > bolts/acorn nuts and using the HAR as an outer and removable low option. > This is all dependent on whether the width of the upper rail of the HAR is > long/wide enough to accommodate some small panniers I already have but just > genuinely curious if anyone else has achieved this rack set-up with success? > > I have no immediate plans for touring or anything, just for occasional > loads around town. > > My other alternatives are to leave the v-brakes alone and use an r14 top > rack + basket on the upper fork crown and drop-out mounts or if still > switching to canti brakes I could use the 32f + basket but reinforce with > long extra struts (as can be seen on some of Will's staff bikes.) > > Thanks, > > Brian Cole > Lawrenceville NJ > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
