I'm using 3x9 Shimano MTB trigger shifters with the Jones Loop 710 bars on my '88 Schwinn KOM. There's plenty of real estate on the ends of the 710s to fit brake levers, shifters, and grips. Narrower bars may not have enough real estate; I have a set of early Jones Cut Loop bars in 560 mm which don't have enough space there.
The angle of the under-grip shift levers isn't as good as it would be on a flat (un-swept) MTB bar, but it works fine for Just Riding Around and occasional trails. I could take a picture later if you'd like to see the setup (quill adapter to threadless stem, FYI). On Mon, Oct 23, 2017 at 10:00 AM, A CT Cyclist <[email protected]> wrote: > Funny you should ask, I've been thinking about the same thing. I'm looking > at the Sun race trigger shifters for 10 speed road because they look clean > and would be compatible with my shimano road derailleur. Has anyone used > trigger shifters from them. If I was building the bike up from scratch I > think I would go with Dram triggers. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
