Hi Carla, Here's a pic with the Nitto Front Rack instead of Mark's Rack: https://flic.kr/p/MU5VJN (enlarge to see some detail).
I wrapped the wire up the drive-side fork leg and then wrapped up the strut (from the mid-fork brazeon) to the front mount. Good luck! shoji On Monday, July 17, 2017 at 9:58:47 PM UTC-4, Orc wrote: > > I don't use a Marks rack, but I'd imagine that you could just run the > wiring up the DS fork leg, across the crown, then forwards on the fork > crown stay and the underside of the rack to the light mount. Ziptied into > place, or just wrapped around the fork leg, stay, and rack rails. > > -david parsons > > > On Monday, July 17, 2017 at 2:01:58 PM UTC-7, Carla Waugh wrote: >> >> Someone sent me a picture of how they used a Marks rack with a basket >> showing how the wiring was done. I wondered if someone has a picture they >> could show? > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
