I was looking for almost the same thing and couldn't find it. I bought an ordinary Tange 26" fork from Bruce Gordon instead.
Perhaps a custom builder could do a run of these forks: 26", lugged, 2.4" tire clearance, absurd number of braze-ons, a nice paint color. I'm not going to say a ton of people would want this, but there's probably enough for a small batch. If so, I'm in. m On Saturday, April 8, 2017 at 11:35:19 AM UTC-4, Tony DeFilippo wrote: > > I'm looking to re-fork my XO-3 for easier 2" tire clearance and mid-fork > braze on's for rackage. I've got a 59cm XO-3 and the head tube is about > 24cm so I'd need at least that, more would be fine or preferred on the > steerer tube. 26" wheel canti preferred as I want to run my Bruce Gordon > fancy canti brakes on this rig. I'd take any color, pretty much any usable > condition. Figure it's a long shot but maybe someone has one laying > around. PM me if you want to sell, I've got some interesting bits for > trade to if that is more up your alley. > > Thanks, > Tony > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
