Is that right? Dang - I didn't catch that earlier.. 23" would certainly be too big - I'm guessing the top tube is also 23"
>From looking at the catalog, the Voyageur has a 'custom blend' Tenax whereas the Passage just says Tenax, but I'm sure I cannot tell the difference. On Monday, January 16, 2017 at 3:57:28 PM UTC-5, John Hawrylak wrote: > > Igor > > The Passage came only in 19", 21', 23" and 25:" frames per the 1986 > Schwinn catalog > > http://waterfordbikes.com/SchwinnCat/flschwinn_1981_1990/1986Ltwt31.html > > http://waterfordbikes.com/SchwinnCat/flschwinn_1981_1990/1986Ltwt17.html > > The 23" would be 58.4cm seat tube. > > Other than component differences, the Passage and the Voyaguer were > identical frames, Tenax main tubes and Cr-Moly stays. The forks were > different. Passage used a 1010 steel fork, Voyaguer a CrMoly steel fork > > John Hawrylak > Woodstown NJ > > On Monday, January 16, 2017 at 2:55:50 PM UTC-5, Belopsky wrote: > >> I just built up a Schwinn Passage that is a 21" (so about 53x53) but it's >> a bit small. Wondering if anyone has something 54-55 with canti brakes that >> I can swap all the parts onto? >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
