Hi Bill, Unfortunately the rubbing is quite annoying since it requires trimming too often. I have been using a 3x8 gear system and I am quite happy with the setup with minimal trimming required :-)
On Fri, Dec 2, 2016 at 7:06 AM, Bill Lindsay <tapebu...@gmail.com> wrote: > I didn't gather that annoyance at trimming was the problem statement. > What I read was that the OP cannot stop the chain from rubbing the front > derailer. If the problem statement is "I'm annoyed that I have to trim the > front derailer every 3 or 4 cogs" then yeah, he needs a wider cage front > der. > > > On Thursday, December 1, 2016 at 2:45:56 PM UTC-8, Joe Bernard wrote: >> >> While I agree that his combination can be made to work, in practice it's >> pretty annoying if you use all the rear gears a lot and have to keep >> trimming the front derailer. But then I have a rather low tolerance for >> trimming a lot, some folks would be fine with it. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
