I have a Clem (still in the build stage) courtesy of list member Joe. My initial thought was to use Albatross bars since my previous experience with Albas was fairly positive. I think I might be happier though if I cut off approximately 1" - 1.5" from the ends. Has anyone here tried this?
Thanks very much, Richard On Wednesday, November 2, 2016 at 4:39:16 PM UTC-4, mike smith wrote: > > Have you thought about Albatross bars? I called into Riv and they said > some custom builds go out with Albatross. > > On Wednesday, November 2, 2016 at 2:56:38 PM UTC-4, iamkeith wrote: >> >> I have non bullmoose boscos on my 59. I used a 130mm, negative-rise stem >> in order to get them low enough. Didn't try the bullmoose, but similar >> (90degree,120mm stem) Did feel too upright. So there's another option. I >> can't imagine liking another bar as much on that bike, though i do wish >> they were less flexy. >> >> A more drastic but viable solution would be to cut the steerer tube so >> you could insert the quill further. >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
