On Dec 10, 1:33 pm, "Frederick, Steve" <frede...@mail.lib.msu.edu> wrote: > I rat an AT on my Rambouillet (or Saluki--can't recall now) for a while (with >a 135 OLD rear hub) and had to go crazy long for the spindle. Tried a Shimano >127 and the granny bottomed out on the chainstay before I even tightened the >crank bolt.
Did you recall spacing the drive-side cup out any? Here's a picture of clearances using 123mm Phil Wood BB on a double AT, on my Hilsen: http://farm3.static.flickr.com/2421/3923293131_0d96604b1c_b.jpg The 127.5mm Shimano BB fit well when doing a triple chainring test fit, but required a few mm's of drive-side spacers for clearance. John McMurry Burlington, VT -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
