Drew, I'd try polishing compounds, starting with the gentlest, toothpaste. Rub it on with a damp cloth, wipe with soft cloth. (actually, you could probably skip the toothpaste at go to:) Next up would be automotive cleaner/wax. If it says cleaner, it should have a mild abrasive. Finally, I would try automotive white rubbing compound, make sure it says fine or something like that. This should not harm your paint, but be careful, try an inconspicuous area, etc. Good luck, Steve
On Saturday, February 20, 2016 at 11:57:12 AM UTC-5, drew wrote: > > I worked a couple of bikes through handlebar swaps and got apparently got > a little carried away with shellacking, but didn't notice/care for about a > week. Tried denatured alcohol and it sorts of worked for some thicker > spots, but the thinner areas are giving me grief. Now it seems like the > removal process is dulling the paint in the frustrating area. > > So what do you use to remove shellac? > > Is there a wax or polish that people use to protect or restore paint on > bikes? > Also, I do get the beausage thing. Battlescars and stuff I can abide, but > this is just sloppy work on my part. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
