Bulls eye. M4-0.7. I took the ring to the hardware store and fitted it, but they didn't have stainless. I'm sure I can find it. Thanks for the help with this.
Michael On Tuesday, December 22, 2015 at 10:46:59 PM UTC-5, Dave Johnston wrote: > > It is probably an M4-0.7. Try a derailleur hi/lo adjustment screw or the > B-tension screw and see if that is the right size. My local hardware store > has Stainless steel set screws in that size but yours may not be as well > stocked. > > -Dave J > > On Tuesday, December 22, 2015 at 3:33:10 PM UTC-5, Michael Hechmer wrote: >> >> I have a very nice Sugino 48 tooth ring, 7075 Al, ramps & pins, silver >> and black. Nice looking. I have had it for a few years but it is still in >> good condition, and shifts very well. During a recent inspection, I >> noticed for the first time that it has threads for a traditional stud which >> would fit between the ring and the crank arm. But I have no stud. Did I >> ever? >> >> If you have an old worn ring with a stud, I would like to have it. If >> you know a source for that small part, I would like to know too. If you >> know what the hole and thread size is, perhaps a longish allen bolt would >> work? >> >> If you can't help with that, perhaps you can tell me where the sun has >> gone? Its been missing in Vermont for almost a month now. >> >> Michael >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
