Jan Heine has written that they "... recommend 20 mm between tire and fender for safety." In the Roadeo write up RBW says you can put fenders over a 33.33mm tire and without fenders can fit a 35mm tire. That's only a 1.6 mm diff in size. I see lots of photos showing tire clearance that look like there is a lot less than 20 mm there. Most photos of fendered bikes I see don't look like they have that large a gap either. Do most folks really leave 20 mm (over 3/4 inch) between tire and fender? Do most folks measure the clearance from the inner fender surface or from the largest protrusion in there (e.g. mounting bolt for a light)?
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
