I'm going to try a B&M Secula Plus <http://www.bike-discount.de/en/buy/busch-mueller-secula-plus-dynamo-rear-light-fender-assembly-453429?currency=5&delivery_country=191> .
On Wed, Nov 11, 2015 at 9:02 PM, Anton Tutter <[email protected]> wrote: > Yes, I forgot about this. Spanninga uses a weird connector that was > designed to let you use bare stripped wires, but it pinches them against > the fender. > > Anton > > velolumino.com > > > On Wednesday, November 11, 2015 at 7:06:38 PM UTC-5, Don Funke wrote: >> >> You may need to take the light apart and solder the contacts for the >> light to fit flush against the fender. It's a hassle, but I had to go that >> route. >> >> On Tuesday, November 10, 2015 at 2:56:08 PM UTC-7, Lungimsam wrote: >>> >>> Before I cut holes into a Honjo fender, does the Spaninga even sit right >>> against the hammered contours, or is it a no go? >>> >>> Can you get it to sit flush or do the contours make it sit other than >>> optimal? Don't want to stress the fender. >>> >> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
