The Nitto M12 will fit if the [diagonal] distance of any of the canti studs to the hole of the fork crown [where you usually pass through the bolt of a side-pull or center-pull] brake, is around 10cm. I am assuing that this hole is present on fork of the bike you are getting. This I learned from Hiroshi of Jitensha when I bought my first M12. -- Rene
-----Original Message----- >From: rcnute <rcn...@hotmail.com> >Sent: Nov 19, 2009 4:17 PM >To: RBW Owners Bunch <rbw-owners-bunch@googlegroups.com> >Subject: [RBW] Nitto M-12 for 26" Atlantis? > >A new-to-me 56cm Atlantis is coming my way. This one doesn't have mid- >fork braze-ons. I have a Nitto Mini but would prefer not to use p- >clamps if possible. Anyone know if an M-12 will fit? Thanks. > >Ryan > >-- > >You received this message because you are subscribed to the Google Groups "RBW >Owners Bunch" group. >To post to this group, send email to rbw-owners-bu...@googlegroups.com. >To unsubscribe from this group, send email to >rbw-owners-bunch+unsubscr...@googlegroups.com. >For more options, visit this group at >http://groups.google.com/group/rbw-owners-bunch?hl=. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=.
