I cut a piece of corrugated plastic (aka coroplast**) to fit snugly inside the tombstone pocket on the large Trunksack.
Thus reinforced, I looped zip ties through the tombstone pocket, and around whatever horizontal rack tube is handiest. **Coroplast can be found free by salvaging promotional/political signs. Any stiff, light board would do. If crafting from scratch, I'd use something stiffer. Wood, plastic, particle board, etc. I would also cut a piece taller than the pocket, so it extends out the top and bottom by a little bit, and then carve notches to route the zip ties and protect the leather. Tim On Fri, May 29, 2015 at 4:30 PM, Ron Mc <bulldog...@gmail.com> wrote: > I used a pair of Sackville hub wipers looped through tombstone strap > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
